Slow case list loading

I have several modules in an application that each have a case list of
about 350 cases. I’ve set up the list view to show 4 case properties. When
navigating to the modules, it sometimes takes a while for the case list to
load. Mobile workers using this application will be conducting many short
surveys quickly, and a lag time in the case list loading could slow them
down a lot.

Is there anything about the setup that is likely to slow down the loading
of the case list, or anything that could be changed to try to make it
faster? Is the number of cases what is likely causing the loading to stall?

Hi, Kevan,

Which type of device are you using- Android or J2ME/Feature Phone? 350
sounds like it should be reasonably supported by Android, but could be a
lot for a feature phone. It could, I believe, also vary depending upon the
quality of the phone/tablet.

Do you have any special filters on the case list?

Jeremy

··· On Wed, Sep 17, 2014 at 8:49 AM, Kevan Christensen < christensen.kevan@gmail.com> wrote:

I have several modules in an application that each have a case list of
about 350 cases. I’ve set up the list view to show 4 case properties. When
navigating to the modules, it sometimes takes a while for the case list to
load. Mobile workers using this application will be conducting many short
surveys quickly, and a lag time in the case list loading could slow them
down a lot.

Is there anything about the setup that is likely to slow down the loading
of the case list, or anything that could be changed to try to make it
faster? Is the number of cases what is likely causing the loading to stall?


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.

We are using Android on the Samsung Galaxy Tab 3 tablet. There is a case
property that updates to indicate when a form for a particular case has
been completed and that is shown on the case list, and we are sorting the
list by name, but other than that there are no special filters.

Thanks,
Kevan

··· On Wednesday, September 17, 2014 3:49:48 PM UTC+3, Kevan Christensen wrote: > > I have several modules in an application that each have a case list of > about 350 cases. I've set up the list view to show 4 case properties. When > navigating to the modules, it sometimes takes a while for the case list to > load. Mobile workers using this application will be conducting many short > surveys quickly, and a lag time in the case list loading could slow them > down a lot. > > Is there anything about the setup that is likely to slow down the loading > of the case list, or anything that could be changed to try to make it > faster? Is the number of cases what is likely causing the loading to stall? >

Thanks, Kevan - that’s a good device and in general it shouldn’t take very
long for the case list to load. Exactly how long does it take for the case
list to load? We are looking into the performance of the case list so it
would be useful to know.

Jeremy

··· On Thu, Sep 18, 2014 at 1:35 AM, Kevan Christensen < christensen.kevan@gmail.com> wrote:

We are using Android on the Samsung Galaxy Tab 3 tablet. There is a case
property that updates to indicate when a form for a particular case has
been completed and that is shown on the case list, and we are sorting the
list by name, but other than that there are no special filters.

Thanks,
Kevan

On Wednesday, September 17, 2014 3:49:48 PM UTC+3, Kevan Christensen wrote:

I have several modules in an application that each have a case list of
about 350 cases. I’ve set up the list view to show 4 case properties. When
navigating to the modules, it sometimes takes a while for the case list to
load. Mobile workers using this application will be conducting many short
surveys quickly, and a lag time in the case list loading could slow them
down a lot.

Is there anything about the setup that is likely to slow down the loading
of the case list, or anything that could be changed to try to make it
faster? Is the number of cases what is likely causing the loading to stall?


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.

Thanks Jeremy. It seems to vary a lot but sometimes it can take a minute or
so to load and in a few cases it has just kept spinning and seemed to hang.

··· On Friday, September 19, 2014 5:52:58 AM UTC+3, Jeremy Wacksman wrote: > > Thanks, Kevan - that's a good device and in general it shouldn't take very > long for the case list to load. Exactly how long does it take for the case > list to load? We are looking into the performance of the case list so it > would be useful to know. > > Jeremy > > On Thu, Sep 18, 2014 at 1:35 AM, Kevan Christensen <christen...@gmail.com > wrote: > >> We are using Android on the Samsung Galaxy Tab 3 tablet. There is a case >> property that updates to indicate when a form for a particular case has >> been completed and that is shown on the case list, and we are sorting the >> list by name, but other than that there are no special filters. >> >> Thanks, >> Kevan >> >> >> On Wednesday, September 17, 2014 3:49:48 PM UTC+3, Kevan Christensen wrote: >>> >>> I have several modules in an application that each have a case list of >>> about 350 cases. I've set up the list view to show 4 case properties. When >>> navigating to the modules, it sometimes takes a while for the case list to >>> load. Mobile workers using this application will be conducting many short >>> surveys quickly, and a lag time in the case list loading could slow them >>> down a lot. >>> >>> Is there anything about the setup that is likely to slow down the >>> loading of the case list, or anything that could be changed to try to make >>> it faster? Is the number of cases what is likely causing the loading to >>> stall? >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "commcare-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to commcare-user...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > Jeremy Wacksman > Dimagi , Inc. > >

Hi again, Kevan,

Can you “report an issue” from your project space so that we can take a
closer look? (at the bottom of any page in your project)

Thanks,

Jeremy

··· On Fri, Sep 19, 2014 at 6:51 AM, Kevan Christensen < christensen.kevan@gmail.com> wrote:

Thanks Jeremy. It seems to vary a lot but sometimes it can take a minute
or so to load and in a few cases it has just kept spinning and seemed to
hang.

On Friday, September 19, 2014 5:52:58 AM UTC+3, Jeremy Wacksman wrote:

Thanks, Kevan - that’s a good device and in general it shouldn’t take
very long for the case list to load. Exactly how long does it take for the
case list to load? We are looking into the performance of the case list so
it would be useful to know.

Jeremy

On Thu, Sep 18, 2014 at 1:35 AM, Kevan Christensen <christen...@gmail.com wrote:

We are using Android on the Samsung Galaxy Tab 3 tablet. There is a case
property that updates to indicate when a form for a particular case has
been completed and that is shown on the case list, and we are sorting the
list by name, but other than that there are no special filters.

Thanks,
Kevan

On Wednesday, September 17, 2014 3:49:48 PM UTC+3, Kevan Christensen wrote:

I have several modules in an application that each have a case list of
about 350 cases. I’ve set up the list view to show 4 case properties. When
navigating to the modules, it sometimes takes a while for the case list to
load. Mobile workers using this application will be conducting many short
surveys quickly, and a lag time in the case list loading could slow them
down a lot.

Is there anything about the setup that is likely to slow down the
loading of the case list, or anything that could be changed to try to make
it faster? Is the number of cases what is likely causing the loading to
stall?


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-user...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.