Multiple parent relationship

Hi all,

we are currently developing an application which should register savings
group members to their respective savings groups; where the savings group
is the parent and the member the child. we are interested to add data from
both sides and link cases with one another.
Some of our members are participating in more than one savings group.
However, as far as we can tell we can only define a singular relationship
using parent_id. Is there a way to add another parent to that?

can you define something like a parent_id2, parent_id3 … ? is there a
another way to do it?

or is it completely impossible to have more than one parent per child?

thanks for your support,

robert

Hey Robert,

This is possible using an experimental feature that is only available on an
advanced plan. If you’d like to explore that option feel free to follow up
directly with me.

best,
Cory

··· On Fri, Jul 22, 2016 at 10:09 AM, ungethuem.robert via commcare-users < commcare-users@googlegroups.com> wrote:

Hi all,

we are currently developing an application which should register savings
group members to their respective savings groups; where the savings group
is the parent and the member the child. we are interested to add data from
both sides and link cases with one another.
Some of our members are participating in more than one savings group.
However, as far as we can tell we can only define a singular relationship
using parent_id. Is there a way to add another parent to that?

can you define something like a parent_id2, parent_id3 … ? is there a
another way to do it?

or is it completely impossible to have more than one parent per child?

thanks for your support,

robert


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hi Robert,

This feature that you have requested is available as part of our
experimental / advanced features. However, please note that these features
require a higher level of support, which is only available on the CommCare
Advanced Software plan. For more information on software plans, you can
visit this page: https://www.commcarehq.org/software/

··· On Friday, July 22, 2016 at 1:39:34 PM UTC+5:30, ungethue...@googlemail.com wrote: > > Hi all, > > we are currently developing an application which should register savings > group members to their respective savings groups; where the savings group > is the parent and the member the child. we are interested to add data from > both sides and link cases with one another. > Some of our members are participating in more than one savings group. > However, as far as we can tell we can only define a singular relationship > using parent_id. Is there a way to add another parent to that? > > can you define something like a parent_id2, parent_id3 ... ? is there a > another way to do it? > > or is it completely impossible to have more than one parent per child? > > thanks for your support, > > robert > >

Hi cory,

I am sorry for the delayed response. We had some issues with prolonging our
pro-bono subscription. we are now on the standard plan plus two way
messaging and data management.

is this still sufficient to do your proposed option? if not, what feature
is needed to do so?

rob

··· On 5 August 2016 at 14:25, Cory Zue wrote:

Hey Robert,

This is possible using an experimental feature that is only available on
an advanced plan. If you’d like to explore that option feel free to follow
up directly with me.

best,
Cory

On Fri, Jul 22, 2016 at 10:09 AM, ungethuem.robert via commcare-users < commcare-users@googlegroups.com> wrote:

Hi all,

we are currently developing an application which should register savings
group members to their respective savings groups; where the savings group
is the parent and the member the child. we are interested to add data from
both sides and link cases with one another.
Some of our members are participating in more than one savings group.
However, as far as we can tell we can only define a singular relationship
using parent_id. Is there a way to add another parent to that?

can you define something like a parent_id2, parent_id3 … ? is there a
another way to do it?

or is it completely impossible to have more than one parent per child?

thanks for your support,

robert


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/commcare-users/V9lA_sC0kyQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hi Kishan,

Thanks for your response.

I am aware that these undertakings might require some more engagement from
our side. As I had described earlier we are on a pro-bono subscription for
a standard plan and two additional features from the pro plan. If you look
at the overview you send me you can see that these features are not within
the pricing /software plan; see: https://www.commcarehq.org/software/
again, I would be glad if you could tell me what exact feature would be
needed for this particular undertaking so that I could maybe motivate an
upgrade or revise our digital strategy with dimagi.

rob

··· On 30 August 2016 at 19:32, Kishan Sampat wrote:

Hi Robert,

This feature that you have requested is available as part of our
experimental / advanced features. However, please note that these features
require a higher level of support, which is only available on the CommCare
Advanced Software plan. For more information on software plans, you can
visit this page: https://www.commcarehq.org/software/

On Friday, July 22, 2016 at 1:39:34 PM UTC+5:30, ungethue...@googlemail.com wrote:

Hi all,

we are currently developing an application which should register savings
group members to their respective savings groups; where the savings group
is the parent and the member the child. we are interested to add data from
both sides and link cases with one another.
Some of our members are participating in more than one savings group.
However, as far as we can tell we can only define a singular relationship
using parent_id. Is there a way to add another parent to that?

can you define something like a parent_id2, parent_id3 … ? is there a
another way to do it?

or is it completely impossible to have more than one parent per child?

thanks for your support,

robert


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/commcare-users/V9lA_sC0kyQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hello Rob,

Sorry for being unclear in my earlier post. I was referring to the higher
level of support that you get for the above request, which is part of the
Advanced Software plan, and it is not a specific feature that you can
request on a pro-bono plan.

Best,
Kishan

···

On Wed, Aug 31, 2016 at 1:40 AM, ‘Robert Ungethuem’ via commcare-users < commcare-users@googlegroups.com> wrote:

Hi Kishan,

Thanks for your response.

I am aware that these undertakings might require some more engagement from
our side. As I had described earlier we are on a pro-bono subscription for
a standard plan and two additional features from the pro plan. If you look
at the overview you send me you can see that these features are not within
the pricing /software plan; see: https://www.commcarehq.org/software/
again, I would be glad if you could tell me what exact feature would be
needed for this particular undertaking so that I could maybe motivate an
upgrade or revise our digital strategy with dimagi.

rob

On 30 August 2016 at 19:32, Kishan Sampat ksampat@dimagi.com wrote:

Hi Robert,

This feature that you have requested is available as part of our
experimental / advanced features. However, please note that these features
require a higher level of support, which is only available on the CommCare
Advanced Software plan. For more information on software plans, you can
visit this page: https://www.commcarehq.org/software/

On Friday, July 22, 2016 at 1:39:34 PM UTC+5:30, ungethue...@googlemail.com wrote:

Hi all,

we are currently developing an application which should register savings
group members to their respective savings groups; where the savings group
is the parent and the member the child. we are interested to add data from
both sides and link cases with one another.
Some of our members are participating in more than one savings group.
However, as far as we can tell we can only define a singular relationship
using parent_id. Is there a way to add another parent to that?

can you define something like a parent_id2, parent_id3 … ? is there a
another way to do it?

or is it completely impossible to have more than one parent per child?

thanks for your support,

robert


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/to
pic/commcare-users/V9lA_sC0kyQ/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hi,

I’d like to use the multiple parent feature on a local instance. Could you tell me what’s the name of the feature flag?

Thanks,

#IT4LIFE

Should be this one i think commcare-hq/toggles.py at master · dimagi/commcare-hq · GitHub

Thanks Cory. Can this be turned on via the web interface? I can’t find it…