Form display conditions

Hi Im wondering if anyone can help me? I am trying to put in a display
condition for a form. Ive read the page ‘Form Display Conditions’ and
followed the instructions. I want the form only to be shown if the answer
to a question in a previous form is one of three different options. I have
referenced the cases by using the ./ but Im still getting error messages.
Any ideas on where I might be going wrong? Thanks Nicola

I have entered
./cause_of_fistula = delivery or ./cause_of_fistula = caesarean_section
or cause_of_fistula = hysterectomy_related_to_caesarean_section
in the display condition box.

Hi Nicola, what kind of error message are you getting ?

I’ve struggled with this before and some coping mechanisms I’ve found
helpful:
(1) Make sure that all the forms in your module are updating a case
(2) Make sure that the logic of your module is configured to display module
and then forms (NOT just forms) because you need to be able to select a
case prior to triggering the form filtering

More tips here in case you haven’t seen it:
https://confluence.dimagi.com/display/commcarepublic/Form+Display+Conditions

··· On Wed, Mar 15, 2017 at 2:06 PM, wrote:

Hi Im wondering if anyone can help me? I am trying to put in a display
condition for a form. Ive read the page ‘Form Display Conditions’ and
followed the instructions. I want the form only to be shown if the answer
to a question in a previous form is one of three different options. I have
referenced the cases by using the ./ but Im still getting error messages.
Any ideas on where I might be going wrong? Thanks Nicola

I have entered
./cause_of_fistula = delivery or ./cause_of_fistula = caesarean_section
or cause_of_fistula = hysterectomy_related_to_caesarean_section
in the display condition box.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225

Hi Thanks for your reply. I was getting an error message when I deploy the
app. I did see that page and also made sure I was doing the things you
mentioned but still no luck. ive now designed my form slightly differently
so I can run the display conditions within the form so basically a work
around.

Separately Im getting an error message when I try and deploy the app - It
says " Failed to download updates. This usually means your app has a
configuration issue (see notification for details). I checked
notifications but these seem to be more about general releases e.g. new
form builder. thanks for your help
Nicola

Nicola Floyd
Head of Impact and Analysis

Operation Fistula

USA UK
401 Congress Avenue 10 Queen Street Place
Suite 1540 London
Austin, TX 78701 EC4R 1BE

··· On Wed, Mar 15, 2017 at 1:05 PM, Claire Cravero wrote:

Hi Nicola, what kind of error message are you getting ?

I’ve struggled with this before and some coping mechanisms I’ve found
helpful:
(1) Make sure that all the forms in your module are updating a case
(2) Make sure that the logic of your module is configured to display
module and then forms (NOT just forms) because you need to be able to
select a case prior to triggering the form filtering

More tips here in case you haven’t seen it: https://confluence.dimagi.
com/display/commcarepublic/Form+Display+Conditions

On Wed, Mar 15, 2017 at 2:06 PM, nicola@opfistula.org wrote:

Hi Im wondering if anyone can help me? I am trying to put in a display
condition for a form. Ive read the page ‘Form Display Conditions’ and
followed the instructions. I want the form only to be shown if the answer
to a question in a previous form is one of three different options. I have
referenced the cases by using the ./ but Im still getting error messages.
Any ideas on where I might be going wrong? Thanks Nicola

I have entered
./cause_of_fistula = delivery or ./cause_of_fistula = caesarean_section
or cause_of_fistula = hysterectomy_related_to_caesarean_section
in the display condition box.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225 <(857)%20317-1225>


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/commcare-users/h3ia3i-jyjI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Did you see Clayton’s reply? Are you using locations?

I don’t think the new form builder release is the issue, it could be that
your app is set to deploy to an earlier version of CommCare.

··· On Wed, Mar 15, 2017 at 4:53 PM, Nicola Floyd wrote:

Hi Thanks for your reply. I was getting an error message when I deploy the
app. I did see that page and also made sure I was doing the things you
mentioned but still no luck. ive now designed my form slightly differently
so I can run the display conditions within the form so basically a work
around.

Separately Im getting an error message when I try and deploy the app - It
says " Failed to download updates. This usually means your app has a
configuration issue (see notification for details). I checked
notifications but these seem to be more about general releases e.g. new
form builder. thanks for your help
Nicola

Nicola Floyd
Head of Impact and Analysis

Operation Fistula
www.opfistula.org

USA UK
401 Congress Avenue 10 Queen Street Place
Suite 1540 London
Austin, TX 78701 EC4R 1BE

On Wed, Mar 15, 2017 at 1:05 PM, Claire Cravero ccravero@dimagi.com wrote:

Hi Nicola, what kind of error message are you getting ?

I’ve struggled with this before and some coping mechanisms I’ve found
helpful:
(1) Make sure that all the forms in your module are updating a case
(2) Make sure that the logic of your module is configured to display
module and then forms (NOT just forms) because you need to be able to
select a case prior to triggering the form filtering

More tips here in case you haven’t seen it: https://confluence.dimagi.
com/display/commcarepublic/Form+Display+Conditions

On Wed, Mar 15, 2017 at 2:06 PM, nicola@opfistula.org wrote:

Hi Im wondering if anyone can help me? I am trying to put in a display
condition for a form. Ive read the page ‘Form Display Conditions’ and
followed the instructions. I want the form only to be shown if the answer
to a question in a previous form is one of three different options. I have
referenced the cases by using the ./ but Im still getting error messages.
Any ideas on where I might be going wrong? Thanks Nicola

I have entered
./cause_of_fistula = delivery or ./cause_of_fistula =
caesarean_section or cause_of_fistula = hysterectomy_related_to_caesar
ean_section
in the display condition box.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager
https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225 <(857)%20317-1225>


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/to
pic/commcare-users/h3ia3i-jyjI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225

Thanks - sorry I wasn’t in office today. Yes I am using locations so Im
going to have a look at this and see if it works. Ill come back to you.
thanks for your help, Nicola

Nicola Floyd
Head of Impact and Analysis

Operation Fistula

USA UK
401 Congress Avenue 10 Queen Street Place
Suite 1540 London
Austin, TX 78701 EC4R 1BE

··· On Fri, Mar 17, 2017 at 7:58 AM, Claire Cravero wrote:

Did you see Clayton’s reply? Are you using locations?

I don’t think the new form builder release is the issue, it could be that
your app is set to deploy to an earlier version of CommCare.

On Wed, Mar 15, 2017 at 4:53 PM, Nicola Floyd nicola@opfistula.org wrote:

Hi Thanks for your reply. I was getting an error message when I deploy
the app. I did see that page and also made sure I was doing the things you
mentioned but still no luck. ive now designed my form slightly differently
so I can run the display conditions within the form so basically a work
around.

Separately Im getting an error message when I try and deploy the app - It
says " Failed to download updates. This usually means your app has a
configuration issue (see notification for details). I checked
notifications but these seem to be more about general releases e.g. new
form builder. thanks for your help
Nicola

Nicola Floyd
Head of Impact and Analysis

Operation Fistula
www.opfistula.org

USA UK
401 Congress Avenue 10 Queen Street Place
Suite 1540 London
Austin, TX 78701 EC4R 1BE

On Wed, Mar 15, 2017 at 1:05 PM, Claire Cravero ccravero@dimagi.com wrote:

Hi Nicola, what kind of error message are you getting ?

I’ve struggled with this before and some coping mechanisms I’ve found
helpful:
(1) Make sure that all the forms in your module are updating a case
(2) Make sure that the logic of your module is configured to display
module and then forms (NOT just forms) because you need to be able to
select a case prior to triggering the form filtering

More tips here in case you haven’t seen it: https://confluence.dimagi.
com/display/commcarepublic/Form+Display+Conditions

On Wed, Mar 15, 2017 at 2:06 PM, nicola@opfistula.org wrote:

Hi Im wondering if anyone can help me? I am trying to put in a display
condition for a form. Ive read the page ‘Form Display Conditions’ and
followed the instructions. I want the form only to be shown if the answer
to a question in a previous form is one of three different options. I have
referenced the cases by using the ./ but Im still getting error messages.
Any ideas on where I might be going wrong? Thanks Nicola

I have entered
./cause_of_fistula = delivery or ./cause_of_fistula =
caesarean_section or cause_of_fistula = hysterectomy_related_to_caesar
ean_section
in the display condition box.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager
https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225 <(857)%20317-1225>


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/to
pic/commcare-users/h3ia3i-jyjI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Claire E. Cravero
Senior Field Manager https://www.linkedin.com/in/claire-cravero-74268559
Dimagi, Inc | 585 Massachusetts Ave | Suite 3 | Cambridge, MA 02139
web: http://www.dimagi.com/ | m: 857-317-1225 <(857)%20317-1225>


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit https://groups.google.com/d/
topic/commcare-users/h3ia3i-jyjI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.