Complicated case management

Hi,
i have a configuration Like this following:
Module 1

  • Form a (field1 , field2, field3, field 4)
    -Form b (Follow up)
    Module 2
  • Form c

In Form a Case manegament i setup “Register new case” and in the section
"SAVING DATA TO THE CASE PROPERTIES" i link the “name” case property to “field
1”
so in the Case List we’ll choose field 1 contenu to do follow-up with
"Form b"
Now what i want to do is to link “field 2” to the “form c” of Module 2
so i can fill out “form c” by choosing “field 2” before.

Thanks

Hello,

You should be able to link fields (case properties) that are saved from
form a to form c just like you did to form b. To do that you just need to
make sure that the case type in the module settings is the same in both
modules and that form c is set to update/close a case on the form settings
page.

Hope this helps,

Jeremy

··· On Mon, May 23, 2016 at 3:36 PM, Babacar Gueye wrote:

Hi,
i have a configuration Like this following:
Module 1

  • Form a (field1 , field2, field3, field 4)
    -Form b (Follow up)
    Module 2
  • Form c

In Form a Case manegament i setup “Register new case” and in the section
"SAVING DATA TO THE CASE PROPERTIES" i link the “name” case property to “field
1”
so in the Case List we’ll choose field 1 contenu to do follow-up with
"Form b"
Now what i want to do is to link “field 2” to the “form c” of Module
2 so i can fill out “form c” by choosing “field 2” before.

Thanks


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.

hi Jeremy,
I did it with your help.
Works fine
Thanks a lot

··· 2016-05-24 19:35 GMT+00:00 Jeremy W. :

Hello,

You should be able to link fields (case properties) that are saved from
form a to form c just like you did to form b. To do that you just need to
make sure that the case type in the module settings is the same in both
modules and that form c is set to update/close a case on the form settings
page.

Hope this helps,

Jeremy

On Mon, May 23, 2016 at 3:36 PM, Babacar Gueye bcgueye@gmail.com wrote:

Hi,
i have a configuration Like this following:
Module 1

  • Form a (field1 , field2, field3, field 4)
    -Form b (Follow up)
    Module 2
  • Form c

In Form a Case manegament i setup “Register new case” and in the section
"SAVING DATA TO THE CASE PROPERTIES" i link the “name” case property to “field
1”
so in the Case List we’ll choose field 1 contenu to do follow-up
with "Form b"
Now what i want to do is to link “field 2” to the “form c” of Module
2 so i can fill out “form c” by choosing “field 2” before.

Thanks


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Jeremy Wacksman
Dimagi http://www.dimagi.com, Inc.


You received this message because you are subscribed to a topic in the
Google Groups “commcare-users” group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/commcare-users/jDD7uAZQRG8/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Best !
Man’nak Yaw Enterprise
(+221) 77 521 31 93
(+221) 78 131 81 52
(+221) 76 328 33 48
Skype: babacar_84
Linkedin : www.linkedin.com/in/babacargueye