Fixture upload could not complete due to the following error: ''NoneType' object has no attribute 'startswith''


(Peter D Lubambi) #1

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture upload
could not complete due to the following error: ‘‘NoneType’ object has no
attribute ‘startswith’’ *". Any idea of what could be the cause to this
error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.

gps-locations_fixtures.xlsx (21.7 KB)


(Cory Zue) #2

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working on a
fix.

Cory

··· On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi wrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture upload
could not complete due to the following error: ‘‘NoneType’ object has no
attribute ‘startswith’’ *". Any idea of what could be the cause to this
error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Peter D Lubambi) #3

Thanks Cory,
I will be waiting for a fix.

··· On 2013-07-16 4:06 PM, "Cory Zue" wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working on a
fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the cause
to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Clayton Sims) #4

Just a quick reminder that if you run into a bug like this, the best email
lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close, etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

··· On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi wrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working on
a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the cause
to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Amelia Sagoff) #5

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

··· On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims wrote:

Just a quick reminder that if you run into a bug like this, the best email
lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working on
a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the cause
to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Peter D Lubambi) #6

Thanks Amelia and Clayton for the reminder. Cory has been able to reproduce
the error, do I need to re-report this to support?
Regards,

··· On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.

You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.com wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.com wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087


(Cory Zue) #7

in this case we’re already tracking it so no need.

sorry about the confusion

··· On Wed, Jul 17, 2013 at 2:41 AM, Peter D Lubambi wrote:

Thanks Amelia and Clayton for the reminder. Cory has been able to
reproduce the error, do I need to re-report this to support?
Regards,

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.com wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.

You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.com wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.com wrote:

You can also always use the “Report an Issue” button (at the bottom of
every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Peter D Lubambi) #8

Hi Cory,
Any updates on this?
Thanks.

··· On 2013-07-17 3:55 PM, "Cory Zue" wrote:

in this case we’re already tracking it so no need.

sorry about the confusion

On Wed, Jul 17, 2013 at 2:41 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Amelia and Clayton for the reminder. Cory has been able to
reproduce the error, do I need to re-report this to support?
Regards,

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.

You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.com wrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force close,
etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are working
on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi plubambi@gmail.comwrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


(Sravan Reddy) #9

Hi Peter,

We have fixed this issue, you can confirm this by uploading the Fixture
file you have attached.

Thanks
Sravan

··· On Tue, Jul 23, 2013 at 11:53 PM, Peter D Lubambi wrote:

Hi Cory,
Any updates on this?
Thanks.
On 2013-07-17 3:55 PM, “Cory Zue” czue@dimagi.com wrote:

in this case we’re already tracking it so no need.

sorry about the confusion

On Wed, Jul 17, 2013 at 2:41 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Amelia and Clayton for the reminder. Cory has been able to
reproduce the error, do I need to re-report this to support?
Regards,

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.comwrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force
close, etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are
working on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi <plubambi@gmail.com wrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.

You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.comwrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force
close, etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are
working on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi <plubambi@gmail.com wrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087

On Tue, Jul 16, 2013 at 6:19 PM, Amelia Sagoff asagoff@dimagi.comwrote:

You can also always use the “Report an Issue” button (at the bottom
of every page in CommCareHQ). This will automatically give us some useful
information about your project that will help us debug the issue quickly.

Thanks,
Amelia

On Tue, Jul 16, 2013 at 11:16 AM, Clayton Sims csims@dimagi.comwrote:

Just a quick reminder that if you run into a bug like this, the best
email lists are actually

commcarehq-support@dimagi.com - For bugs on the CommCare HQ website

or

commcare-support@dimagi.com - For bugs on the mobile app (force
close, etc).

You’ll get a more consistent response from us there, since we treat
incoming emails there as priority bugs.

-Clayton

On Tue, Jul 16, 2013 at 9:38 AM, Peter D Lubambi plubambi@gmail.comwrote:

Thanks Cory,
I will be waiting for a fix.
On 2013-07-16 4:06 PM, “Cory Zue” czue@dimagi.com wrote:

Hi Peter,

Thanks for reporting this. We’ve reproduced the error and are
working on a fix.

Cory

On Tue, Jul 16, 2013 at 2:55 AM, Peter D Lubambi <plubambi@gmail.com wrote:

Hi all,
I am trying to upload a fixture excel, I get this error " *Fixture
upload could not complete due to the following error: ‘‘NoneType’ object
has no attribute ‘startswith’’ *". Any idea of what could be the
cause to this error.

Attached is the fixture spreadsheet I am trying to upload.
Thanks in advance.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Peter Dotto Lubambi,
Chief Strategy Officer,
Unyayo Systems Limited,
plubambi@unyayo.co.tz,
www.unyayo.co.tz,
+255 786 087 087


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.