# Displaying repeat count in repeat group **URL:** \ **Category:** Users\ **Created:** [February 5, 2014, 2:59am UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634 "2014-02-05T02:59:20Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Scott\_Lee](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@Scott\_Lee](https://forum.dimagi.com/u/Scott_Lee)\ **Post date:** [February 5, 2014, 2:59am UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/1 "2014-02-05T02:59:20Z")
Hi all, In a repeat group that's meant to register individual children in a household, we would like to include at the end of the group sequence a label that says: "NOTE: You said that there are children in this household. You have now registered children. Please determine whether to register another child." After swiping, the "Add new group?" popup should appear. Is there a way to display the cumulative repeat count as indicated above? Also, in the form builder, there's an option that says "Disallow Repeat Add and Remove." Adding groups is self-evident, but if this option is left unchecked, how exactly can the user remove groups? Thanks, Scott ---
**Author:** ![Scott\_Lee](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@Scott\_Lee](https://forum.dimagi.com/u/Scott_Lee)\ **Post date:** [February 5, 2014, 5:47pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/2 "2014-02-05T17:47:56Z")
Hi all, Regarding: Also, in the form builder, there's an option that says "Disallow Repeat Add > and Remove." Adding groups is self-evident, but if this option is left > unchecked, how exactly can the user remove groups? As additional information, this is from Fawziya Karim, my colleague in Kenya who began training our surveyors today: > there is something strange happening with these repeats: if by mistake you > hit "add group" and realize that you don't need another group, it is hard > to undo this. You will still have to go through that entire group. I tried > going back few questions hoping that I will get the "ad group/do not add > group" prompt again but it does not show up. And this only happened on some > phones. On some phones, going back to the previous question would bring > back the prompt but in some others it doesn't. I encountered this problem > at least 4 times. Do you know what might going on? All of the phones are Moto G's running Jelly Bean and the latest version of CommCareODK. Thanks, Scott > **···** > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee wrote: > > > Hi all, > > > > In a repeat group that's meant to register individual children in a > > household, we would like to include at the end of the group sequence a > > label that says: > > > > "NOTE: You said that there are children > > in this household. You have now registered > > children. Please determine whether to register another child." > > > > After swiping, the "Add new group?" popup should appear. > > > > Is there a way to display the cumulative repeat count as indicated above? > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > Add and Remove." Adding groups is self-evident, but if this option is > > left unchecked, how exactly can the user remove groups? > > > > Thanks, > > Scott ---
**Author:** ![William\_Pride](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/w/b19c9b/32.png) [@William\_Pride](https://forum.dimagi.com/u/William_Pride)\ **Post date:** [February 5, 2014, 6:01pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/3 "2014-02-05T18:01:26Z")
Hi Scott, For your first q > **···** > > On Wed, Feb 5, 2014 at 12:47 PM, Scott Lee wrote: > > > Hi all, > > > > Regarding: > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > > > > Add and Remove." Adding groups is self-evident, but if this option is > > > left unchecked, how exactly can the user remove groups? > > > > As additional information, this is from Fawziya Karim, my colleague in > > Kenya who began training our surveyors today: > > > > > there is something strange happening with these repeats: if by mistake > > > you hit "add group" and realize that you don't need another group, it is > > > hard to undo this. You will still have to go through that entire group. I > > > tried going back few questions hoping that I will get the "ad group/do not > > > add group" prompt again but it does not show up. And this only happened on > > > some phones. On some phones, going back to the previous question would > > > bring back the prompt but in some others it doesn't. I encountered this > > > problem at least 4 times. Do you know what might going on? > > > > All of the phones are Moto G's running Jelly Bean and the latest version > > of CommCareODK. > > > > Thanks, > > Scott > > > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > Hi all, > > > > > > In a repeat group that's meant to register individual children in a > > > household, we would like to include at the end of the group sequence a > > > label that says: > > > > > > "NOTE: You said that there are children > > > in this household. You have now registered > > > children. Please determine whether to register another child." > > > > > > After swiping, the "Add new group?" popup should appear. > > > > > > Is there a way to display the cumulative repeat count as indicated above? > > > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > > Add and Remove." Adding groups is self-evident, but if this option is > > > left unchecked, how exactly can the user remove groups? > > > > > > Thanks, > > > Scott > > > > -- > > You received this message because you are subscribed to the Google Groups > > "commcare-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). ---
**Author:** ![William\_Pride](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/w/b19c9b/32.png) [@William\_Pride](https://forum.dimagi.com/u/William_Pride)\ **Post date:** [February 5, 2014, 6:04pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/4 "2014-02-05T18:04:12Z")
Whoops, sorry about that accidental send all. To your first question I would recommend checking out the "count" function here: [https://confluence.dimagi.com/display/commcarepublic/CommCare+Functions#CommCareFunctions-count](https://confluence.dimagi.com/display/commcarepublic/CommCare+Functions#CommCareFunctions-count) If you set a hidden value within your repeat group to calculate the count of whatever value you're repeating over (for example, /data/repeat\_node/) then you should get the current iteration for every group. As to that error, if you would navigate to the application that's having a problem on HQ and report a problem through that page I would be happy to take a look. Best, Will > **···** > > On Wed, Feb 5, 2014 at 1:01 PM, William Pride wrote: > > > Hi Scott, > > > > For your first q > > > > On Wed, Feb 5, 2014 at 12:47 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > Hi all, > > > > > > Regarding: > > > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > > > > > > Add and Remove." Adding groups is self-evident, but if this option is > > > > left unchecked, how exactly can the user remove groups? > > > > > > As additional information, this is from Fawziya Karim, my colleague in > > > Kenya who began training our surveyors today: > > > > > > > there is something strange happening with these repeats: if by mistake > > > > you hit "add group" and realize that you don't need another group, it is > > > > hard to undo this. You will still have to go through that entire group. I > > > > tried going back few questions hoping that I will get the "ad group/do not > > > > add group" prompt again but it does not show up. And this only happened on > > > > some phones. On some phones, going back to the previous question would > > > > bring back the prompt but in some others it doesn't. I encountered this > > > > problem at least 4 times. Do you know what might going on? > > > > > > All of the phones are Moto G's running Jelly Bean and the latest version > > > of CommCareODK. > > > > > > Thanks, > > > Scott > > > > > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > > > Hi all, > > > > > > > > In a repeat group that's meant to register individual children in a > > > > household, we would like to include at the end of the group sequence a > > > > label that says: > > > > > > > > "NOTE: You said that there are > > > > children in this household. You have now registered children. Please determine whether to register another child." > > > > > > > > After swiping, the "Add new group?" popup should appear. > > > > > > > > Is there a way to display the cumulative repeat count as indicated above? > > > > > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > > > Add and Remove." Adding groups is self-evident, but if this option is > > > > left unchecked, how exactly can the user remove groups? > > > > > > > > Thanks, > > > > Scott > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "commcare-users" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). ---
**Author:** ![Scott\_Lee](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@Scott\_Lee](https://forum.dimagi.com/u/Scott_Lee)\ **Post date:** [February 10, 2014, 8:00pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/5 "2014-02-10T20:00:05Z")
Hi Will, Thanks for the advice. That works great. As a follow-up just for learning purposes, this works when the repeat count is first stored as a hidden value, and then the display text references the hidden value. However, it doesn't work if the display text references the repeat count directly, as in . Is there a logic behind that? I've noticed that display text also can't handle IF statements. Can display text only directly reference question IDs (whether standard questions or hidden values)? Thanks again, Scott > **···** > > On Wed, Feb 5, 2014 at 1:04 PM, William Pride wrote: > > > Whoops, sorry about that accidental send all. > > > > To your first question I would recommend checking out the "count" function > > here: > > [CommCare Functions - CommCare Public - CommCare Public](https://confluence.dimagi.com/display/commcarepublic/CommCare+Functions#CommCareFunctions-count) > > > > If you set a hidden value within your repeat group to calculate the count > > of whatever value you're repeating over (for example, /data/repeat\_node/) > > then you should get the current iteration for every group. > > > > As to that error, if you would navigate to the application that's having a > > problem on HQ and report a problem through that page I would be happy to > > take a look. > > > > Best, > > Will > > > > On Wed, Feb 5, 2014 at 1:01 PM, William Pride [wpride@dimagi.com](mailto:wpride@dimagi.com) wrote: > > > > > Hi Scott, > > > > > > For your first q > > > > > > On Wed, Feb 5, 2014 at 12:47 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > > > Hi all, > > > > > > > > Regarding: > > > > > > > > Also, in the form builder, there's an option that says "Disallow Repeat > > > > > > > > > Add and Remove." Adding groups is self-evident, but if this option is > > > > > left unchecked, how exactly can the user remove groups? > > > > > > > > As additional information, this is from Fawziya Karim, my colleague in > > > > Kenya who began training our surveyors today: > > > > > > > > > there is something strange happening with these repeats: if by mistake > > > > > you hit "add group" and realize that you don't need another group, it is > > > > > hard to undo this. You will still have to go through that entire group. I > > > > > tried going back few questions hoping that I will get the "ad group/do not > > > > > add group" prompt again but it does not show up. And this only happened on > > > > > some phones. On some phones, going back to the previous question would > > > > > bring back the prompt but in some others it doesn't. I encountered this > > > > > problem at least 4 times. Do you know what might going on? > > > > > > > > All of the phones are Moto G's running Jelly Bean and the latest version > > > > of CommCareODK. > > > > > > > > Thanks, > > > > Scott > > > > > > > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > > > > > Hi all, > > > > > > > > > > In a repeat group that's meant to register individual children in a > > > > > household, we would like to include at the end of the group sequence a > > > > > label that says: > > > > > > > > > > "NOTE: You said that there are > > > > > children in this household. You have now registered children. Please determine whether to register another child." > > > > > > > > > > After swiping, the "Add new group?" popup should appear. > > > > > > > > > > Is there a way to display the cumulative repeat count as indicated > > > > > above? > > > > > > > > > > Also, in the form builder, there's an option that says "Disallow > > > > > Repeat Add and Remove." Adding groups is self-evident, but if this > > > > > option is left unchecked, how exactly can the user remove groups? > > > > > > > > > > Thanks, > > > > > Scott > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "commcare-users" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "commcare-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). ---
**Author:** ![Amelia\_Sagoff1](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/a/ecd19e/32.png) [@Amelia\_Sagoff1](https://forum.dimagi.com/u/Amelia_Sagoff1)\ **Post date:** [February 11, 2014, 4:47pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/6 "2014-02-11T16:47:03Z")
Hi Scott, Luckily there is an easy answer to this one! if you use "output ref" it will only be able to directly reference question IDs. If you use "output value" you can reference xpath expressions as well as question IDs. We recommend always using "value" instead of "ref", since it does everything "ref" does and more! So the output you want is: . Thanks, Amelia > **···** > > On Mon, Feb 10, 2014 at 2:00 PM, Scott Lee wrote: > > > Hi Will, > > > > Thanks for the advice. That works great. > > > > As a follow-up just for learning purposes, this works when the repeat > > count is first stored as a hidden value, and then the display text > > references the hidden value. > > > > However, it doesn't work if the display text references the repeat count > > directly, as in . > > > > Is there a logic behind that? I've noticed that display text also can't > > handle IF statements. Can display text only directly reference question IDs > > (whether standard questions or hidden values)? > > > > Thanks again, > > Scott > > > > On Wed, Feb 5, 2014 at 1:04 PM, William Pride [wpride@dimagi.com](mailto:wpride@dimagi.com) wrote: > > > > > Whoops, sorry about that accidental send all. > > > > > > To your first question I would recommend checking out the "count" > > > function here: > > > [CommCare Functions - CommCare Public - CommCare Public](https://confluence.dimagi.com/display/commcarepublic/CommCare+Functions#CommCareFunctions-count) > > > > > > If you set a hidden value within your repeat group to calculate the count > > > of whatever value you're repeating over (for example, /data/repeat\_node/) > > > then you should get the current iteration for every group. > > > > > > As to that error, if you would navigate to the application that's having > > > a problem on HQ and report a problem through that page I would be happy to > > > take a look. > > > > > > Best, > > > Will > > > > > > On Wed, Feb 5, 2014 at 1:01 PM, William Pride [wpride@dimagi.com](mailto:wpride@dimagi.com) wrote: > > > > > > > Hi Scott, > > > > > > > > For your first q > > > > > > > > On Wed, Feb 5, 2014 at 12:47 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com)wrote: > > > > > > > > > Hi all, > > > > > > > > > > Regarding: > > > > > > > > > > Also, in the form builder, there's an option that says "Disallow > > > > > > > > > > > Repeat Add and Remove." Adding groups is self-evident, but if this > > > > > > option is left unchecked, how exactly can the user remove groups? > > > > > > > > > > As additional information, this is from Fawziya Karim, my colleague in > > > > > Kenya who began training our surveyors today: > > > > > > > > > > > there is something strange happening with these repeats: if by mistake > > > > > > you hit "add group" and realize that you don't need another group, it is > > > > > > hard to undo this. You will still have to go through that entire group. I > > > > > > tried going back few questions hoping that I will get the "ad group/do not > > > > > > add group" prompt again but it does not show up. And this only happened on > > > > > > some phones. On some phones, going back to the previous question would > > > > > > bring back the prompt but in some others it doesn't. I encountered this > > > > > > problem at least 4 times. Do you know what might going on? > > > > > > > > > > All of the phones are Moto G's running Jelly Bean and the latest > > > > > version of CommCareODK. > > > > > > > > > > Thanks, > > > > > Scott > > > > > > > > > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com)wrote: > > > > > > > > > > > Hi all, > > > > > > > > > > > > In a repeat group that's meant to register individual children in a > > > > > > household, we would like to include at the end of the group sequence a > > > > > > label that says: > > > > > > > > > > > > "NOTE: You said that there are > > > > > > children in this household. You have now registered children. Please determine whether to register another child." > > > > > > > > > > > > After swiping, the "Add new group?" popup should appear. > > > > > > > > > > > > Is there a way to display the cumulative repeat count as indicated > > > > > > above? > > > > > > > > > > > > Also, in the form builder, there's an option that says "Disallow > > > > > > Repeat Add and Remove." Adding groups is self-evident, but if this > > > > > > option is left unchecked, how exactly can the user remove groups? > > > > > > > > > > > > Thanks, > > > > > > Scott > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > > > Groups "commcare-users" group. > > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > > an email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "commcare-users" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "commcare-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). ---
**Author:** ![Scott\_Lee](https://dimagi.b-cdn.net/letter_avatar_proxy/v4/letter/s/4af34b/32.png) [@Scott\_Lee](https://forum.dimagi.com/u/Scott_Lee)\ **Post date:** [February 11, 2014, 4:57pm UTC](https://forum.dimagi.com/t/displaying-repeat-count-in-repeat-group/1634/7 "2014-02-11T16:57:48Z")
Thanks, Amelia -- I always wondered what the difference was. Good to know! Scott > **···** > > On Tue, Feb 11, 2014 at 11:47 AM, Amelia Sagoff wrote: > > > Hi Scott, > > > > Luckily there is an easy answer to this one! > > > > if you use "output ref" it will only be able to directly reference > > question IDs. If you use "output value" you can reference xpath expressions > > as well as question IDs. We recommend always using "value" instead of > > "ref", since it does everything "ref" does and more! > > > > So the output you want is: . > > > > Thanks, > > Amelia > > > > On Mon, Feb 10, 2014 at 2:00 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com) wrote: > > > > > Hi Will, > > > > > > Thanks for the advice. That works great. > > > > > > As a follow-up just for learning purposes, this works when the repeat > > > count is first stored as a hidden value, and then the display text > > > references the hidden value. > > > > > > However, it doesn't work if the display text references the repeat count > > > directly, as in . > > > > > > Is there a logic behind that? I've noticed that display text also can't > > > handle IF statements. Can display text only directly reference question IDs > > > (whether standard questions or hidden values)? > > > > > > Thanks again, > > > Scott > > > > > > On Wed, Feb 5, 2014 at 1:04 PM, William Pride [wpride@dimagi.com](mailto:wpride@dimagi.com) wrote: > > > > > > > Whoops, sorry about that accidental send all. > > > > > > > > To your first question I would recommend checking out the "count" > > > > function here: > > > > [CommCare Functions - CommCare Public - CommCare Public](https://confluence.dimagi.com/display/commcarepublic/CommCare+Functions#CommCareFunctions-count) > > > > > > > > If you set a hidden value within your repeat group to calculate the > > > > count of whatever value you're repeating over (for example, > > > > /data/repeat\_node/) then you should get the current iteration for every > > > > group. > > > > > > > > As to that error, if you would navigate to the application that's having > > > > a problem on HQ and report a problem through that page I would be happy to > > > > take a look. > > > > > > > > Best, > > > > Will > > > > > > > > On Wed, Feb 5, 2014 at 1:01 PM, William Pride [wpride@dimagi.com](mailto:wpride@dimagi.com) wrote: > > > > > > > > > Hi Scott, > > > > > > > > > > For your first q > > > > > > > > > > On Wed, Feb 5, 2014 at 12:47 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com)wrote: > > > > > > > > > > > Hi all, > > > > > > > > > > > > Regarding: > > > > > > > > > > > > Also, in the form builder, there's an option that says "Disallow > > > > > > > > > > > > > Repeat Add and Remove." Adding groups is self-evident, but if this > > > > > > > option is left unchecked, how exactly can the user remove groups? > > > > > > > > > > > > As additional information, this is from Fawziya Karim, my colleague in > > > > > > Kenya who began training our surveyors today: > > > > > > > > > > > > > there is something strange happening with these repeats: if by > > > > > > > mistake you hit "add group" and realize that you don't need another group, > > > > > > > it is hard to undo this. You will still have to go through that entire > > > > > > > group. I tried going back few questions hoping that I will get the "ad > > > > > > > group/do not add group" prompt again but it does not show up. And this only > > > > > > > happened on some phones. On some phones, going back to the previous > > > > > > > question would bring back the prompt but in some others it doesn't. I > > > > > > > encountered this problem at least 4 times. Do you know what might going on? > > > > > > > > > > > > All of the phones are Moto G's running Jelly Bean and the latest > > > > > > version of CommCareODK. > > > > > > > > > > > > Thanks, > > > > > > Scott > > > > > > > > > > > > On Tue, Feb 4, 2014 at 9:59 PM, Scott Lee [scott.s.lee@gmail.com](mailto:scott.s.lee@gmail.com)wrote: > > > > > > > > > > > > > Hi all, > > > > > > > > > > > > > > In a repeat group that's meant to register individual children in a > > > > > > > household, we would like to include at the end of the group sequence a > > > > > > > label that says: > > > > > > > > > > > > > > "NOTE: You said that there are > > > > > > > children in this household. You have now registered children. Please determine whether to register another child." > > > > > > > > > > > > > > After swiping, the "Add new group?" popup should appear. > > > > > > > > > > > > > > Is there a way to display the cumulative repeat count as indicated > > > > > > > above? > > > > > > > > > > > > > > Also, in the form builder, there's an option that says "Disallow > > > > > > > Repeat Add and Remove." Adding groups is self-evident, but if this > > > > > > > option is left unchecked, how exactly can the user remove groups? > > > > > > > > > > > > > > Thanks, > > > > > > > Scott > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "commcare-users" group. > > > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > > > an email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "commcare-users" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "commcare-users" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "commcare-users" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [commcare-users+unsubscribe@googlegroups.com](mailto:commcare-users+unsubscribe@googlegroups.com). > > For more options, visit [https://groups.google.com/groups/opt\_out](https://groups.google.com/groups/opt_out).