Connecting Commcare mobile client to the server without using internet

With SD card transfer you should taker of losing your data due to memory
corrupt! Just remember the risk.

Hello,

We currently support two alternative workflows for projects in areas with
low connectivity. They are Wi-Fi Direct and SD Card Transfer which you can
read about in the linked documentation.

Best,
Will

Hello,
I have been trying to get an alternative to connecting the mobile phones
using commcare to the server without the need for the internet connection.

I am implementing in an area where there is limited internet
connectivity so theoretically the forms cannot be sent but am required to
seek a solution that does not involve use of internet for the connection.

Any clue on how i can do this.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.

To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.

··· On Mar 28, 2014 1:14 PM, "William Pride" wrote: > On Fri, Mar 28, 2014 at 3:25 AM, Ssembajjwe Geoffrey < ssembajjweg@gmail.com> wrote: > For more options, visit https://groups.google.com/d/optout.

Thanks Tewelde,

You are right, but just to note in situations where the internet
connectivity isn’t good the data sits on the phone/SD Card until the phone
is able to pick the data signal and then it can transfer the data. One
could agree maybe to have the phones get to an area where there is data
signal at particular intervals. matbe every two weeks and so on. Otherwise
just like any app that has a server sitting in the cloud you need the data
signal to send the data.

Regards

David Guina | MHealth Coordinator | Radio Distance Learning Project |
World Vision Uganda
Phone:+256-414-345758, +256-312-264690/264691/261685 |Fax:+256-414-258587
Cell:+256-787-614-724/256-755-003-107
Email: david_guina@wvi.org | Skype: dmugha | Mailing: 15B Nakasero Road,
P. O. Box 5319, Kampala-UGANDA

“I can do all things through Christ who srengtheneth me” Philippians 4:13

··· From: Tewelde Aregawi To: commcare-users@googlegroups.com Date: 03/28/2014 04:41 PM Subject: Re: Connecting Commcare mobile client to the server without using internet Sent by: commcare-users@googlegroups.com

With SD card transfer you should taker of losing your data due to memory
corrupt! Just remember the risk.
On Mar 28, 2014 1:14 PM, “William Pride” wpride@dimagi.com wrote:

Hello,

We currently support two alternative workflows for projects in areas
with low connectivity. They are Wi-Fi Direct and SD Card Transfer which
you can read about in the linked documentation.

Best,
Will

On Fri, Mar 28, 2014 at 3:25 AM, Ssembajjwe Geoffrey < ssembajjweg@gmail.com> wrote:

Hello,
I have been trying to get an alternative to connecting the mobile
phones using commcare to the server without the need for the internet
connection.

I am implementing in an area where there is limited internet
connectivity so theoretically the forms cannot be sent but am required to
seek a solution that does not involve use of internet for the connection.

Any clue on how i can do this.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.

To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hello

I am having problem of synching some mobiles to server even with fast
internet connection
when i try to sync it says “having issues communicating with server please
try again later” i know there is two options “direct wifi” and “dumping to
Sd card” which is my phones doesn’t support direct wifi so that i am having
only damping forms to sd card which is risky. i am wondering if some one
can explain to me why this is happening and how to send with out any
problem for all my data’s?

··· On Fri, Mar 28, 2014 at 5:30 PM, David Guina wrote:

Thanks Tewelde,

You are right, but just to note in situations where the internet
connectivity isn’t good the data sits on the phone/SD Card until the phone
is able to pick the data signal and then it can transfer the data. One
could agree maybe to have the phones get to an area where there is data
signal at particular intervals. matbe every two weeks and so on. Otherwise
just like any app that has a server sitting in the cloud you need the data
signal to send the data.

Regards

David Guina | MHealth Coordinator | Radio Distance Learning Project |
World Vision Uganda

  • Phone:*+256-414-345758, +256-312-264690/264691/261685 |Fax:
    +256-414-258587 *Cell:**+*256-787-614-724/256-755-003-107
    Email: david_guina@wvi.org | Skype: dmugha | Mailing: 15B Nakasero
    Road, P. O. Box 5319, Kampala-UGANDA

“I can do all things through Christ who srengtheneth me” Philippians 4:13

From: Tewelde Aregawi teweldino.mvp@gmail.com
To: commcare-users@googlegroups.com
Date: 03/28/2014 04:41 PM
Subject: Re: Connecting Commcare mobile client to the server
without using internet
Sent by: commcare-users@googlegroups.com

With SD card transfer you should taker of losing your data due to memory
corrupt! Just remember the risk.
On Mar 28, 2014 1:14 PM, “William Pride” <wpride@dimagi.comwpride@dimagi.com> wrote:

Hello,

We currently support two alternative workflows for projects in areas
with low connectivity. They are Wi-Fi Direct and SD Card Transfer which you
can read about in the linked documentation.

Best,
Will

On Fri, Mar 28, 2014 at 3:25 AM, Ssembajjwe Geoffrey < ssembajjweg@gmail.com ssembajjweg@gmail.com> wrote:

Hello,
I have been trying to get an alternative to connecting the mobile
phones using commcare to the server without the need for the internet
connection.

I am implementing in an area where there is limited internet
connectivity so theoretically the forms cannot be sent but am required to
seek a solution that does not involve use of internet for the connection.

Any clue on how i can do this.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.

To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.comcommcare-users%2Bunsubscribe@googlegroups.com
.

For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.comcommcare-users%2Bunsubscribe@googlegroups.com
.
For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.comcommcare-users+unsubscribe@googlegroups.com
.
For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Hello,

If you’re having problems submitting your data please fill out a bug report
as described here:
https://confluence.dimagi.com/display/commcarepublic/Bug+Reports

Best,
Will

··· On Fri, Mar 28, 2014 at 1:27 PM, Tewelde Aregawi wrote:

Hello

I am having problem of synching some mobiles to server even with fast
internet connection
when i try to sync it says “having issues communicating with server please
try again later” i know there is two options “direct wifi” and “dumping to
Sd card” which is my phones doesn’t support direct wifi so that i am having
only damping forms to sd card which is risky. i am wondering if some one
can explain to me why this is happening and how to send with out any
problem for all my data’s?

On Fri, Mar 28, 2014 at 5:30 PM, David Guina David_Guina@wvi.org wrote:

Thanks Tewelde,

You are right, but just to note in situations where the internet
connectivity isn’t good the data sits on the phone/SD Card until the phone
is able to pick the data signal and then it can transfer the data. One
could agree maybe to have the phones get to an area where there is data
signal at particular intervals. matbe every two weeks and so on. Otherwise
just like any app that has a server sitting in the cloud you need the data
signal to send the data.

Regards

David Guina | MHealth Coordinator | Radio Distance Learning Project |
World Vision Uganda

  • Phone:*+256-414-345758, +256-312-264690/264691/261685 |Fax:
    +256-414-258587 *Cell:**+*256-787-614-724/256-755-003-107
    Email: david_guina@wvi.org | Skype: dmugha | Mailing: 15B Nakasero
    Road, P. O. Box 5319, Kampala-UGANDA

“I can do all things through Christ who srengtheneth me” Philippians
4:13

From: Tewelde Aregawi teweldino.mvp@gmail.com
To: commcare-users@googlegroups.com
Date: 03/28/2014 04:41 PM
Subject: Re: Connecting Commcare mobile client to the server
without using internet
Sent by: commcare-users@googlegroups.com

With SD card transfer you should taker of losing your data due to memory
corrupt! Just remember the risk.
On Mar 28, 2014 1:14 PM, “William Pride” <wpride@dimagi.comwpride@dimagi.com> wrote:

Hello,

We currently support two alternative workflows for projects in areas
with low connectivity. They are Wi-Fi Direct and SD Card Transfer which you
can read about in the linked documentation.

Best,
Will

On Fri, Mar 28, 2014 at 3:25 AM, Ssembajjwe Geoffrey < ssembajjweg@gmail.com ssembajjweg@gmail.com> wrote:

Hello,
I have been trying to get an alternative to connecting the mobile
phones using commcare to the server without the need for the internet
connection.

I am implementing in an area where there is limited internet
connectivity so theoretically the forms cannot be sent but am required to
seek a solution that does not involve use of internet for the connection.

Any clue on how i can do this.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.

To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.comcommcare-users%2Bunsubscribe@googlegroups.com
.

For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google
Groups “commcare-users” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to commcare-users+unsubscribe@googlegroups.comcommcare-users%2Bunsubscribe@googlegroups.com
.
For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.comcommcare-users+unsubscribe@googlegroups.com
.
For more options, visit https://groups.google.com/d/optouthttps://groups.google.com/d/optout
.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


You received this message because you are subscribed to the Google Groups
"commcare-users" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to commcare-users+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.